I have a website client that commissioned me to create a website with some portions of it are active server pages that uses a database to display vital informations for its users. I developed the website using ASP.NET technology but immediately after showing him the homepage design of his website, told me to use MySQL for the database. Although it is not the popular choice for an ASP.NET application database, he opted to use MySQL probably because of its low cost in terms of hosting fees. Besides, there is no great deal in granting his request because in .NET, connecting to a MySQL database is as easy as 123. (moreā¦)
Category: Syndicated Posts
meron ba kayong kakaibang love story?
Prepys.com Aggregator Site
Bitstop Network Service launched today the www.prepys.com website to act as the aggregator of content for all the prepys blog authors! You dont need to visit each prepys blog site to find out if there is a new story.
Just check out the main aggregator site at www.prepys.com. If you click on each new article, it will take you to the original source blog!
Please check it out! If you are a writer and would like to join our prepys community, kindly email us at team[at]bnshosting.net
HP All In One Troubleshooting Guide
-
Verify that there is power at the wall outlet.
-
Verify that the computer and the all-in-one product have a three-prong power plug.
-
Remove the product cable from any power strips or surge suppressors, and plug it directly into a grounded (three-prong) wall outlet.
-
For models that have an external power supply module, verify that the power supply module is plugged in correctly. Some power supply modules have a green LED built into the connector end or on the power supply module. This LED will be lit if power is present. If the LED is not lit, replace the power supply module.
-
Plug the power cord into a different electrical outlet.
-
If the all-in-one has an ADF with an external cable plugging into the back of the product:
-
Turn off the unit.
-
Unplug the power cable from the wall outlet.
-
Unplug the ADF cable from the back of the product.
-
Plug the ADF cable to the back of the product.
-
Plug in the power cable to the wall outlet, and turn on the power.
-
If no change, the problem is not the ADF.
-
If the problem clears, turn off the all-in-one, unplug the power cable, and plug in the ADF.
-
If the error returns, the ADF is defective. Contact HP Customer Care to get the ADF replaced.
-
-
-
Unplug the USB or parallel communication cable from the back of the all-in-one and try to power up the all-in-one. The computer may be grounding out through the communications cable. If this corrects the issue, check the grounding of the computer and outlet.If the above steps did not resolve your issue, contact HP for additional issue verification or the servicing of your product.
-
Unplug the all-in-one power cable from any power strip or surge suppressor. Plug it directly into a wall outlet.
-
Verify that the computer power cable, the all-in-one power cable, and the power strip have a three-prong plug.
-
Reduce the number of devices sharing the power circuit in the office or home wiring.
-
If the problem still exists, service your product.
-
Verify that the computer and the all-in-one product have a three-prong power plug.
-
Unplug the product cable from any power strips or surge suppressors, and plug it directly into a grounded (three-prong) wall outlet.
-
If the all-in-one has an ADF with an external cable plugging into the back of the product:
-
Turn off the unit.
-
Unplug the power cable from the wall outlet.
-
Unplug the ADF cable from the back of the product.
-
Plug the ADF cable to the back of the product.
-
Plug in the power cable, and turn on the power.
-
If no change, the problem is not the ADF.
-
If the problem clears, turn off the all-in-one, unplug the power cable, and plug in the ADF.
-
If the error returns, the ADF is defective. Contact HP Customer Care to get the ADF replaced.
-
-
-
Unplug the USB or parallel communication cable from the back of the all-in-one and try to power up the all-in-one. The computer may be grounding out through the communications cable. If this corrects the issue, check the grounding of the computer and outlet.If the above steps did not resolve your issue, contact HP for additional issue verification or the servicing of your product.
-
Check for jams in the unit or in the ADF (if applicable).
-
Verify that the computer and the all-in-one product have a three-prong power plug.
-
Remove the product cable from any power strips or surge suppressors, and plug it directly into a grounded (three-prong) wall outlet.
-
Unplug any other devices attached to the parallel or USB ports. Some devices use a software key that plugs into the parallel port. This can cause an error on the all-in-one.
-
If the all-in-one has an ADF with an external cable plugging into the back of the product:
-
Turn off the unit.
-
Unplug the power cable from the wall outlet.
-
Unplug the ADF cable from the back of the product.
-
Plug the ADF cable to the back of the product.
-
Plug in the power cable to the wall outlet, and turn on the power.
-
If no change, the problem is not the ADF.
-
If the problem clears, turn off the all-in-one, unplug the power cable, and reconnect the ADF.
-
If the error returns, the ADF is defective. Contact HP Customer Care to get the ADF replaced.
-
-
-
Unplug the computer parallel cable from the back of the all-in-one and try to turn on the all-in-one again. The computer may be grounding out through the parallel port. If this corrects the issue, check the grounding of the computer and outlet.If the above steps did not resolve your issue, service your product.
Aging
There are plenty of side projects that I can work on while here on my foreign assignment. I can do them after working at our client. I can do them on weekends, which are quite idle.
But I barely do them, Research & Development that used to be my lifeblood. Am I losing it as a techie?
Or, is it I’m becoming older. Physically, I’m less willing and capable of working 12 to 16 hours a day like I did ten years ago. Back then, I was very motivated and obsessed that I was working on something that would make it big. Did I succeed? Sadly no, not in my opinion. I guess I gained in a few small things but what I lost out on is enough to make me go thinking all the time, what could have been?
Part of what could have been would be: what if I spent more time in being a more artistic and cultured person? That is what I am trying to catch up on - the reason I make efforts at writing. But part of me says, I have to try a second time at success, I’m never too old, and aging is a good thing as it leads to maturity.